For installers and professionals
- 10 -
2. Installation and maintenance
The heat pump must be installed by a professional team. The users are not qualified to
install by themselves, otherwise the heat pump might be damaged and risky for users’
safety.
2.1. Notice before installation：
2.1.1. The inlet and outlet water unions can’t bear the weight of soft pipes. The heat pump
must be connected with hard pipes!
2.1.2. In order to guarantee the heating efficiency, the water pipe length should be ≤10m
between the pool and the heat pump.
2.2. Installation instruction
2.2.1. Location and size
The heat pump should be installed in a place with good ventilation
*
Distance Minimale
Fltre
Vannes hydrauliques
Traitement automatique
To Next Page
Loading...