For users
- 6 -
1.Power On: Press for 3 seconds to light up screen, then press to power on heat pump.
2.Adjust Set Temperature: When screen is unlocked, press or to display or adjust the set
temperature.
3. Mode Selection: Press to select mode.
a. Auto : adjustable temperature range 12~40℃
b. Heating : adjustable temperature range 18~40℃
c. Cooling : adjustable temperature range 12~30℃
4. Smart/Silence mode selection:
①
Smart mode as default will be activated when heat pump is on, and screen shows .
② Press to enter Silence Mode
, and screen shows .
(Suggestion: select Smart mode for initial heating)
5. Defrosting
a. Auto Defrosting: When heat pump is defrosting, will be flashing. After defrosting, will stop
flashing.
b. Compulsory Defrosting: When heat pump is heating, press and together for 5 seconds to
start compulsory defrosting, and will be flashing. After defrosting, will stop flashing.
(Note: Compulsory defrosting intervals should be more than 30 minutes and the compressor should run for
more than 10 minutes.)
6. Temperature display conversion between ℃ and ℉:
Press " " and " " together for 5 seconds to switch between ℃ and ℉.
7. Wifi setting
Please kindly check the last page.
To Next Page
Loading...
