IPS IPS300-SIN - Page 14

IPS home inverter manual
www.ips-ups.eu 4.09.2017
info@ips-ups.eu IPS-home-inverter-manual_ENG-R1
14
12
Soft-start fault
Contact the dealer or supplier from whom it
was purchased.
13
BUS voltage is
too high (Battery
is overchargered
）
Check the battery voltage. Contact the
dealer or supplier if the problem persists.
14
Charging over-
current
Contact the dealer or supplier from whom it
was purchased.
15
Battery voltage is
too high
Check the battery voltage.
16
Battery over-
discharge
protection
Check the battery voltage
17
Fault self-locking
Wait for auto clearance or manually shut
down and restart the inverter
18
CT fault
Check the CT signal line
IPS-UPS
Ul. Mikołowska 39
44-200 Rybnik, Poland