44
• If you insert the stick upside down, the device can break
down during use. Please check the insertion direction of
the stick before use.
• Close the cover of the stick insertion part when the device
is not in use to prevent any substances from getting inside.
Get your device.
Slide and open the Cover
of the stick insertion
part at the top of the
device.
Insert a tobacco stick designed
for lil SOLID into the stick
insertion part with the
tobacco part facing down
and press the stick in until
it touches the bottom of the
stick insertion part.
Start device
When the preheating
process ends, the
Status LED lights come
on, and vibration occurs
simultaneously.
This means that the
preheating process has
ended, and the stick is
ready for use.
Press the Button for
2 seconds until vibration
occurs.
After 2 seconds, the Status
LED blinks in ice blue, and
vibration occurs
simultaneously.
Preheating will last for
about 25 seconds. The
duration time of the
preheating process can
vary according to the use
environment.
To Next Page
Loading...
