Need help?Do you have a question about the IRadimed MRidium 3860 and is the answer not in the manual?
Overview of initial inspection and pre-operational checkout procedures.
Introduction to the preparation for use section.
Detailed steps for inspecting the instrument's physical condition upon receipt.
Verifying instrument function through electrical and performance tests.
Testing all controls and indicators for proper operation and feature functionality.
Steps for configuring and testing the radio communication system.
Guide for creating and managing custom drug protocols in the pump.
Information on the MR IV pump's specific features and programming.
Procedure for verifying the functionality of the pulse oximeter.
Overview of the Service Mode's capabilities for diagnostics and testing.
Overview of the Service Mode A screen layout and initial information.
Screen for displaying and adjusting pump calibration settings.
Screen showing detailed battery charge, voltage, and cell status.
Accessing diagnostic functions like Set Clock, History Log, and Radio Settings.
Detailed procedures for routine maintenance and systems testing.
Overview of PM instructions, service modes, and system tests.
Guidelines for routine maintenance, including cleaning and inspections.
Recommended solutions and methods for cleaning instrument surfaces.
Detailed steps for inspecting mechanical components like seals and doors.
Verification procedures for the 3860+ pump using Service Mode.
Procedures for verifying accurate fluid delivery rates using analyzers.
Procedure for verifying the pulse oximeter functionality and readings.
Guidelines for maintaining and caring for the battery pack.
Procedures for updating the pump's operating software version.
Instructions for installing the DERS feature and its software.
Procedures for comprehensive system verification after component replacement.
Comprehensive list of equipment for system testing and calibration.
Procedures for verifying the main 3860+ pump unit's functionality.
Verification procedures for the MRidium Side Car unit.
Procedures for calibrating the pump mechanism for accuracy.
Performing factory calibration procedures for pump accuracy.
Testing pump accuracy at various flow rates using Infutest.
Verifying radio communication setup and operation.
Overview of the MR IV pump's operational principles and system design.
Introduction to the operational principles of the MR IV pump.
Discussion of the pump's mechanical components and their functions.
Description of the chassis assembly and component layout.
Explanation of the linear peristaltic pumping mechanism.
How pressure sensors detect and measure fluid conditions.
How mechanical parts function during normal operation.
Discussion of the pump's electronic systems and their interrelationships.
Overview of the microprocessor-based electronics and processors.
Functional operation of power supplies and motor drivers.
Description of processor functions, including reset and communication.
How the air-in-line detection system uses ultrasonic signals.
Function of the door sensor in detecting door status and safety interlocks.
Operation of the Free-Flow Detector Switch for safety.
Description of the custom LCD display and its components.
Definitions for signal names and their roles in communication.
List and explanation of critical error codes for pump malfunctions.
General| Brand | IRadimed |
|---|---|
| Model | MRidium 3860 |
| Category | Microphone |
| Language | English |
To Next Page
