InfiRay Outdoor • MATE Series • User Manual www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
Blurred image with clear GUI
The objective lens is not focused
Adjust the focus ring of the objective lens until the image
becomes clear
There is dust or condensate on the interior or
exterior optical surfaces of the lens
Wipe off the outside optical surfaces with a soft cotton
cloth. Let it dry by leaving it in a warm environment for 4
hours
No analog video output
The video output function is not turned on Turn the video output function in the Main Menu
Data cable doesn’t support data transmission Replace a new data cable
Point of impact does not match the aiming
point
Zeroing needs to be done Do zeroing according to the section 12
Zeroing profile is incorrect Check the zeroing profile setting
21 Update and InfiRay Outdoor
MATE series thermal imaging attachment support InfiRay Outdoor
technology, which allows you to transmit the image from the thermal imager
to the smartphone or tablet via Wi-Fi in real time mode.
You can find detailed instructions on InfiRay Outdoor in the separate
brochure at the site www.infirayoutdoorcom.
The design of the riflescope provides the software update option. Updating
is possible via the InfiRay Outdoor application. Also, it is feasible to
download and update software from the official website.
About InfiRay Outdoor
You can get InfiRay Outdoor application in the official website, or
search InfiRay Outdoor in App store, or scan the QR code to download
InfiRay Outdoor APP.
To Next Page
Loading...
