iRest A305 - Page 11

18
19
1 2
8.Head cushions and backrest pad's dismounting and use manual
·The head cushion allows you to contr ol the intensity of the neck and shoulder
massage, You can decide whether to use the head cushion (Recommend to use).
The backrest cushion and the backrest is connected by zipper (1), head cushion
and the backrest cushion connected by the Velcro as show in the illustration (2).
Zipper
Thread gluing
Method of usageMethod of usage
·Put the heavy massage chairs on the wood floor for a may damage the floor,
so please place a carpet or other object to avoid this damage.
Caution: Do not move the chairs with its wheels on wood floor, rough ground or in
a narrow space. Two people are required to lift the chair. During the lifting period,
take the calf rest end sealing plate and backrest cover grooves as the force-bearing
point(Please do not lift armrest directly.)
9.Floor Protection
10.Method of movement
3 4
·Then turn the legs fixing cover over the round tube on both sides of the legs
(figure 3)
·Then use 2pcs M4 screws fix the legs on the massage chair, turn up and down to
check if there are any problems, the wires and air hose get stuck or not, finish the
installation. (figure 4)
·Make sure that all wires are far above the ground, tilt the backrest backward to
a certain degree (with the gravity center resting on the wheels), push the chair
forward or backward with your hands and finally resume the chair to the normal
position in a slow and gentle manner.(Note: During movement you must turn off
the power first and then unplug the power cord and the controller cord.)
Warning : Massage chair rear wheels are only suitable for short distance movement
for long distances, pls use other assistive tools to move the massage chair.