1 2
1.Enter the smart device main menu. Open "Settings" and select the "Bluetooth"
option. Open "Bluetooth", and Bluetooth will automatically "Search for a New
Bluetooth Device".
2.The smart device will search for the corresponding Bluetooth model (e.g. IMCM-
XXXX). Click the "Match" button. If you are asked whether to match with the
device, you just select "Match" to complete matching.
3.Turn on "Music Player" in the smart device and select the song to play.
V. Operation Instructions for Bluetooth Speaker Play
VI. Turn off the power and stop massage
·If the power button is pressed during massage, it will stop all the massage
functions immediately, and the backrest, the legrest and massage chair
manipulators will go back to the default positions. When the preset massage time
is up, all the massage functions will be OFF. The backrest and the legrest will not
go back to the default positions.
·Shut off the power supply of this product, as shown in the attached figure (Power
Shut-off Diagram of the Product).
Method of Usage
Switch position diagram of power supply
Unplug the power cord
VII. Installation Instructions for Legrest
·After connecting the wires and the air hose between the legrest and the massage
chair, remove the cable ties and insert the connecting part into the seat (Figure 1).
·Place the round tubes on the left and right sides of the legrest onto the legrest
support (Figure 2).
3 4
Method of Usage
1 2
Zipper Zipper
·Next, flip the leg rest cover over to cover the round tubes on either side of the leg
rest (Picture 3).
·Secure the leg rest to the massage chair with two M4 screws (one on each
side).Check for bends in pipes, cables, wires, or other abnormalities when turning
up and down. If all is well, install the leg rests (Figure 4).
VIII. Instructions for Removal and Use of Head Cushion and Backrest
·The headrest reduces the intensity of the neck and shoulder kneading massage.
You can decide whether to use a headrest (recommended) according to your own
needs. The backrest and the cushion are connected by a zipper (1). The headrest
and backrest are connected by a zipper (2).
3534
POWER INPUT
ON/ OFF
To Next Page
