0706
Memory
Memory
Method of usage Method of usage
Note: The specific displays refer to the actual object of this product!
1.Switch power supply on
Diagram of plug in
Diagram of the switch position of power supply
2.Start to massage
1). Press power button, massage chair automatically reclining, and start massage.
2). Automatic shoulder position and massage acupressure point detection, waiting for
the completion of testing.
3). If there is difference with the massage balls and the actual shoulder position, youcan
adjust the up and down button to a suitable position. Shoulder position has 10
grades adjustable. It will run automatic massage if there is no adjustment on
shoulder position within 10 seconds
Button
Description
Display
Move the massage balls upward to a suitable position
Move the massage balls downward to a suitable position
Shoulder
adjust
High shoulder position
suitable shoulder position
Low shoulder position
4) Choose massage function to massage
·Memory function massage
Function Button
Display
Memory
Massage
Press button "Upper body / M1" or "Lower body /M2" for 3 seconds, then enter into
memory massage function "M1" or "M2", it will revert to the previous memory
massage mode.
FUSE: T5AL 250V
POWER INPUT
CONTROLLER JACK
To Next Page
Loading...
