EasyManua.ls Logo

iRig Micro Amp - Specifications

iRig Micro Amp
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
11
3 Specifications
Common
Speaker: 1x4” full range (4 Ohms)
Output power: 15W (DC IN powered) or 7.5W (battery powered)
Power supply
Power: AA batteries (included) or DC IN (not included)
Battery duration: approx. 15h with 6xAA alakline
DC IN: 9V-15V DC negative inside
USB Interface
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
Device Connection: micro-USB
Instrument Input
Connector: unbalanced, Hi-Z, TS 1/4” Jack. Tip: signal / Shield: ground
Instrument Input Level: from 30mVpp to 6.9Vpp
Instrument Input Impedance: 1MOhms
Frequency response: 20 Hz – 20kHz +/-1.5dB
Stereo Headphone Output
Connector: 1/8” TRS Jack. Tip: right / Ring: left / Shield: ground
Dimensions and weight
Dimensions: 210mm x 125mm x 155mm
Weight: 1.26kg