IRIS BLW-C2 - User Manual

Other manuals for IRIS BLW-C2

User Manual24 pages

Questions and Answers

H
hrobinsonAug 18, 2025
What to do if the IRIS Food Warmer shows error code E3?
- M
  melodysandersAug 18, 2025
  If the IRIS Food Warmer displays error code E3, it indicates that the product is running in a high-temperature environment, with too much warm air from other heaters, with a folded hose, or that the main body temperature is rising abnormally. To resolve this, unplug the power plug from the electric socket and allow the unit to cool down. The error will clear once the temperature returns to normal, and the product will automatically restart.
M
Megan MaddenAug 20, 2025
What to do if the IRIS Food Warmer blanket is not dry or warm?
- C
  Claudia McdonaldAug 21, 2025
  If the blanket is not drying or warming up in your IRIS Food Warmer, consider the following: 1. Dry one blanket at a time. 2. Ensure the air filter is clean. 3. Lay the blanket out correctly. 4. If the blanket is heavy, lift it slightly to allow warm air to reach the bottom. 5. Open the air flap. 6. Remove any obstructions from the air entry or outlet. 7. Keep the product at least 15cm away from the wall.
J
Jonathan PhillipsAug 23, 2025
What to do if the IRIS BLW-C2 Food Warmer shows error code E5?
- T
  Theresa CrosbyAug 23, 2025
  If the IRIS Food Warmer displays error code E5, it indicates a product failure. Unplug the power plug from the electric socket and contact IRIS Customer Service Center. Do not touch the product until it has cooled down.
C
cloveAug 26, 2025
What to do if the IRIS BLW-C2 shows error code E1?
- J
  Joy LaneAug 26, 2025
  If the IRIS Food Warmer displays error code E1, it means the air entry port on the right side is facing down when choosing the mode. Place the product in the correct position to dismiss the error.
A
alisonvincentAug 27, 2025
What to do if the IRIS Food Warmer shows error code E2?
- B
  brendamartinAug 28, 2025
  If the IRIS Food Warmer displays error code E2, it indicates that the air entry on the right side is facing down while the product is running. To fix this, place the product in the correct position to dismiss the error.
J
Jodi GonzalezAug 30, 2025
How to fix an IRIS BLW-C2 Food Warmer that is not running and no air is coming out?
- P
  phensleyAug 30, 2025
  If your IRIS Food Warmer is not running and no air is coming out, make sure the power plug is securely plugged into the electric socket and that you have pressed the START/ON button.
D
Donna EdwardsSep 2, 2025
What to do if my IRIS BLW-C2 blanket is not dry or warmed up?
- S
  Sarah MorganSep 2, 2025
  If your blanket isn't drying or warming, several factors could be at play. First, ensure you are only drying one blanket at a time. Check if the air filter is dirty. Make sure the blanket is laid out correctly and is not too heavy, potentially needing a slight lift to allow warm air to circulate. Confirm that the air flap is open and that neither the air entry port nor the air outlet is blocked. Lastly, ensure the food warmer is at least 15cm away from the wall.
K
Kimberly BeckSep 4, 2025
Why is my IRIS BLW-C2 not running and no air is coming out?
- A
  Andrea LeeSep 4, 2025
  If your IRIS Food Warmer isn't running and no air is flowing, make sure the power plug is securely plugged into the electrical socket. Also, verify that you have pressed the START button.
R
Robert BrownSep 6, 2025
What to do if my IRIS BLW-C2 Food Warmer shows error code E3?
- W
  wheelerdennisSep 6, 2025
  If your IRIS Food Warmer displays error code E3, it indicates the product is running in a high-temperature environment, with too much warm air from other heaters, or with a folded hose, causing the main body temperature to rise abnormally. Unplug the power plug and allow the unit to cool down. The error will clear, and the product will restart automatically once the temperature returns to normal.
C
Christine MillerSep 9, 2025
What does it mean if my IRIS Food Warmer shows error code E5?
- D
  Daniel GomezSep 9, 2025
  If your IRIS Food Warmer shows error code E5, it means a product failure has occurred. Unplug the power plug from the electric socket and contact IRIS Customer Service Center. Wait until the main body has cooled down before touching it.