CAUTIONS
Air Filter (clean once a month)
Use a vacuum hose/nozzle or other cleaning device to clear the
air filter.
A clogged or dirty air filter will cause the product to function
poorly.
Please replace the air filter when it is broken or has holes. Please
contact IRIS USA, Inc. Customer Service for assistance.
4. Press START/ON button.
This product will display the remaining time after it starts running. It
will stop heating after set time has run out, and then it will cool down
the main body and hose with a 20 second air blast before it stops
running.
• If START/ON button is not pressed, product will return to standby
mode after five minutes.
• Press CLEAR/OFF button if you want to stop drying. It will stop
heating and then it will cool down the main body and hose with a
20 second air blast before it stops running.
START/ON
6. Put away the product after use.
• Firmly grip the power plug to unplug it from the electric socket.
• Refold the hose.
• Bundle up the power cord.
Various Uses (manual settings)
Please close the air flap before use.
Closet and Wardrobe
Keep the main body upright and closet door open. Point the air outlet
towards the closet and run the product at “Low Temperature” mode
(Yellow).
TIMER
TEMPERATURE
START/ON
CLEAR/OFF
PRESET FUNCTIONS
WINTER SUMMER
WARM UP
Dust Mite Eliminator
MODE
TIME MINS
SETTINGS
POWER SUPPLY
Please do not place the main body inside
the closet.
Keep the closet door and drawers open
wide while in use.
Underneath the Sink
Keep the main body upright and cabinet door open. Point the air outlet
towards the cabinet and run the product at “Low Temperature” mode
(Yellow).
Please perform cleaning and maintenance after the product has cooled down. Not doing so may
cause burns or electrical shock. Unplug the power plug from the electric socket before cleaning.
CAUTIONS
Air entry ports Air entry port
TIMER
TEMPERATURE
START/ON
CLEAR/OFF
PRESET FUNCTIONS
WINTER SUMMER
WARM UP
Dust Mite Eliminator
MODE
TIME MINS
SETTINGS
POWER SUPPLY
TIMER
TEMPERATURE
START/ON
CLEAR/OFF
PRESET FUNCTIONS
WINTER SUMMER
WARM UP
Dust Mite Eliminator
MODE
TIME MINS
SETTINGS
POWER SUPPLY
Cover
TIMER
TEMPERATURE
START/ON
CLEAR/OFF
PRESET FUNCTIONS
WINTER SUMMER
WARM UP
Dust Mite Eliminator
MODE
TIME MINS
SETTINGS
POWER SUPPLY
Use of strong cleaning agents such
as amylacetic ester, alcohol, oil, etc.
can cause fading, deformation or
breakdown.
TIMER
TEMPERATURE
START/ON
CLEAR/OFF
PRESET FUNCTIONS
WINTER SUMMER
WARM UP
Dust Mite Eliminator
MODE
TIME MINS
SETTINGS
POWER SUPPLY
1. Remove dust with a vacuum hose/nozzle.
2. Remove the cover to clean the dust on the air entry ports.
HOW TO USE CLEANING AND MAINTENANCE
CAUTIONS
Main Body
Use a cloth with diluted neutral cleaning agent to wipe the
product.
11 12
To Next Page
Loading...