22
Powering the IrisVision Using the
Magnetic Braided Power Cable
As an alternative to using the built-in battery to operate your
IrisVision, you can connect the headset to an external cell
phone battery (not included) using the magnetic braided
power cable, This method is useful when you want to watch
videos and television; it provides continuous power to the
headset without draining the battery in the Display Unit.
NOTES:
• As long as the built-in battery has at least a 50%
charge, using this method holds the existing charge.
• This method does not charge the built-in battery.
• The headset may overheat. If it overheats, disconnect
the cable and let the headset cool down.
• Do not place an overheated headset on the Wireless
Charging Pad until it has cooled down for at least 15
minutes.
Magnetic Braided
Power Port
To Next Page
Loading...