28
Using IrisVision: Step 3 – Setting Up
Focus
Slowly spin the focus wheel on the top center of your
headset to adjust the focus, similar to adjusting binoculars.
1. After powering on your headset, it should automatically
show Focus mode. It contains an image with beach
chairs. If you are not in Focus mode, press the Mode
button until you hear “Focus” and see the large bold
letters.
2. Reset the focus by rotating the wheel as far left as
possible.
3. Slowly begin adjusting it by rotating the wheel towards
the right until the object is in focus. You can rotate the
wheel in either direction as needed.
4. Pick an object at least 4 feet away to look at through
your screen. Try looking at a picture on the wall or a
family member’s face.
To Next Page
Loading...
