38
Voice Commands
NOTE: Activate voice prompt and give the command.
Remember to wait for the audio beep or the image of a
microphone to appear.
General Commands
• Say “IrisVision Assistant” for general instructions on
how to use the IrisVision headset controls.
• Say “Voice Command Help” for instructions on how to
use voice commands.
• Say “Go to sleep” to put the headset to sleep when
prompted.
• Say “Shut down” to turn off the headset when
prompted.
Information Commands
• Say “Info” for information on the current mode name,
the battery level, the volume level, the magnification
level, and the brightness level.
• Say “Battery” for the current battery level.
• Say “Volume” for the current volume level.
• Say “Zoom” for the current magnification level.
• Say “Brightness” for the current brightness level.
• Say “Mode name” for the name of the current mode.
• Say “Serial number” for the serial number of the
headset.
To Next Page
