46
Amazon Alexa Setup
This is intended to help you either set up your own personal
Amazon account or create an Amazon account in order to
use the built-in Alexa feature with your IrisVision headset.
Please follow these instructions if you already have an
Amazon Alexa account.
Signing into an Existing Amazon Account
1. Make sure the IrisVison device is charged before
proceeding. When charging is complete, power the
device on.
2. Remove the IrisVision Display Unit from the headset.
3. Access the IrisVision Manager app on the Display Unit
(for instructions, see “Configuring Wi-Fi” on page 15).
4. Look for the “Amazon Account” option.
a. Check “Confirm your age”, and then proceed to
Setup Amazon Account.
b. Enter your username and password from your
existing Amazon account.
c. You will be prompted to allow Amazon to connect to
your device. Select Allow, and it returns to the
“Amazon Account” section in IrisVision Manager.
5. Your setup is complete. Press the Home button to return
to the IrisVision app (allow about 10 seconds).
To Next Page
Loading...