IRiver MPlayer - Using Windows Media Player

32
Chapter4 Other Information
1. After connecting the product to the USB jack of
your PC using the USB cable, run Windows Media
player 11.
2. After selecting [Mplayer], click the right mouse
button and select [Format]. Click [OK] when the
message to conrm initialization appears.
3. The initialization process is completed and the
product is disconnected from your PC.
Note
Do not disconnect the product from PC while upgrading
rmware.
Using Windows Media Player 11
Initializing Disk
1. Connect the product to the USB jack of your PC.
2. Run iriver Firmware Updater application in the
installation CD and complete the upgrade process by
following the on-screen instructions.
Firmware upgrade in Windows Media Player 11
Note
You need to backup the necessary les before
initialization as formatted les cannot be recovered.