iRobot i3 - Detailed Cleaning Procedures; Cleaning Full Bin Sensors; Washing the Dust Bin; Cleaning the Edge-Sweeping Brush

Roomba
®
i3/i4 Owner’s Guide 6
EN
Washing the Bin
Cleaning the Full Bin Sensors
Wipe the inner sensors with a clean,
dry cloth
Make sure the bin is completely dry.
Reinsert filter and place bin back in
the robot.
Wipe the bin door with a clean, dry cloth.
2
3
3
Important: Do not wash the filter. Remove
the filter before washing the bin.
Release the bin, remove the filter,
and open the bin door.
Remove and empty the bin.
1
1
Note: Bin is not dishwasher safe.
Use a small screwdriver to loosen the
screw holding the Edge-Sweeping Brush
in place.
Pull to remove the Edge-Sweeping
Brush. Remove any hair or debris, then
reinstall the brush.
Cleaning the Edge-Sweeping Brush
1
2
Rinse the bin using warm water.
2
Closed Door
Opened Door