iRobot RCA-Y2 - Page 22

21Roomba Combo® 10 Max + AutoWash dock Owner’s Guide
EN
Cleaning the full bin sensors
1
Remove and empty the bin.
2
Wipe the inner sensors with a clean, dry cloth.
3
Wipe the bin door with a clean, dry cloth.
Closed door
Open door
4
Clear any debris from the vacuum path
Washing the bin
1
Release the bin, remove the 󷀎lter, and open
the bin door.
2
Rinse the dust bin and water tank using
warm water.
3
Make sure bin is completely dry. Reinsert 󷀎lter
and place bin back in the robot.
IMPORTANT: The bin is not dishwasher
safe. Do not wash the 󷀎lter. Remove the
󷀎lter before washing the bin.