EN
Roomba Combo™ i5 Owner’s Guide 2
Using Your Roomba® Robot Vacuum
Positioning the Home Base™ Charging Station Charging
• Place the robot on the charging station to activate the battery.
Note: Your robot comes with a partial charge, but we recommend that
you charge the robot for 3 hours prior to starting the first cleaning job.
• If the “CLEAN” text is pulsing while charging, the robot is in the middle of a
cleaning job and will automatically resume where it left.off once recharged.
• The robot uses a small amount of power whenever it is on the Home Base.
You can put the robot in a further-reduced power state when not in use. For
instructions and more details on this Reduced Power Standby Mode, refer to
the iRobot Home App.
• For long-term storage, turn off the robot by removing it from the charging
station and holding down for 10 seconds. Store the robot in a cool, dry
place.
• Follow step-by-step instructions to set up your Roomba.
• Set an automatic cleaning schedule and customise your cleaning preferences.
• Access to tips, tricks, and answers to commonly asked questions.
Download the iRobot Home App and Connect to Wi
Good Wi-Fi
®
Coverage
*Objects are not to scale.
4 ft. (1.2 m)
from stairs
4 ft.(1.2 m)
in front
1.5 ft. (0.5 m)
both sides
WARNING: To prevent the risk of your robot falling downstairs, ensure that
the charging station is placed at least 4 feet (1.2 meters) away from stairs.
White Light Ring While Charging
Solid White: fully charged
Pulsing White: charging
Pulsing Red: charging/low
To Next Page
Loading...
Need help?
General
