12 iRobot Verro Owner’s Manual
Cleaning the Filter Bag
Verro uses the force of the water pumped through the filter bag to maintain
traction on the pool floor bottom and walls. If the filter bag becomes clogged,
Verro will not be able to clean as effectively and may have trouble moving
along the bottom and up the walls properly.
1
Unplug the Power Supply. (Please keep the plug away from contact with
water.) Unplug the floating power cord (turn the locking collar
counter-clockwise to unlock it) from the Power Supply.
2
Place Verro upside down on a towel (to prevent scratching the
robot’s shell).
3
Unlock and remove the bottom panel
by pushing the two locking tabs toward the sides of the robot.
To Next Page
Loading...