iRobot Verro 600 - Using Verro

8 iRobot Verro Owner’s Manual
Using Verro
2
Uncoil the floating power cord and spread it over the surface of the water.
1
Position the handle diagonally across Verro. Each time Verro cleans the pool, reverse the
direction of the handle. This will help keep Verro from twisting the floating power cord and
ensure more even coverage.
3
Place Verro in the water and rock it from side to side to allow air to escape.
Let Verro settle to the bottom of the pool. Ensure that it is right side up and level.
3.5m/12
ft
4
Place the Power Supply (transformer) at least 3.5 meters /12 feet from the pool.