What should I check if my Iron Edison Inverter cannot charge the battery?
If the Iron Edison Inverter is unable to charge the battery, check the power and communication wires to the inverter. Also, verify the inverter's specifications, ensuring its charge voltage is suitable for the battery type, referring to section 2.2 Battery Specifications.
What does it mean when my Iron Edison REVOLT4 battery module cannot start the INVERTER?
If the Iron Edison Inverter battery module fails to start the inverter, check the power and communication wires connected to the inverter. You may need to contact the inverter manufacturer for further assistance.
What to do if my Iron Edison REVOLT4 Inverter's charge cycle stopped with HV LED?
If your Iron Edison Inverter's charge cycle has stopped and the HV LED is illuminated, it indicates high voltage protection. Stop the charge cycle and begin discharging. Adjust the charge control/inverter settings for Absorb, Bulk, Float, and Equalize as detailed in section 6.1.3.
What to do if my Iron Edison REVOLT4 battery shows low voltage?
If your Iron Edison Inverter battery indicates low voltage, stop discharging it and charge the battery within 15 days.
What does it mean if the ALM LED is flashing (2hz) on my Iron Edison Inverter?
If the ALM LED on your Iron Edison Inverter is flashing at 2Hz, it indicates a battery address duplication. To resolve this, check the dip switch settings as described in section 5.2.2.
What to do if my Iron Edison Inverter shows external COM error with RUN LED?
If your Iron Edison Inverter displays an external COM error with the RUN LED, check the communication cable between the battery and the inverter. Also, verify the inverter selection in the app as per section 7.0, or use V Logic as per section 5.2.3.
What to do if my Iron Edison REVOLT4 Inverter battery charge/discharge shows over current?
If your Iron Edison Inverter battery is showing an overcurrent during charge or discharge, reduce the charging or discharging current. The battery will automatically release in 1 minute.
What to do if my Iron Edison Inverter battery has a short circuit?
If the Iron Edison Inverter battery experiences a short circuit, check the external power wire of the battery, eliminate the short circuit connection, and then restart the battery.
General| Brand | Iron Edison |
|---|---|
| Model | REVOLT4 |
| Category | Inverter |
| Language | English |
To Next Page