EasyManua.ls Logo

Iron Edison REVOLT4 - Storage and Transport; Storage; Installation Preparation; Transport

Default Icon
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
www.ironedison.com
4. Installation Preparation
3.1 Storage
The battery should be stored in a dry, clean, shaded and well-ven-
tilated area.
The battery needs to be charged to at least 70% before storing it.
Store the battery modules for no longer than 6 months.
Keep the battery from dropping, turning over and any other seri-
ous impact.
Keep away from children and pets.
3.2 Transport
Lithium-ion batteries are hazardous goods. Therefore the fol-
lowing points must be observed when transporting the battery
modules:
Observe the general transport regulations based on the
mode of transport as well as all legal regulations for haz-
ardous goods.
Keep batteries face up and do not allow them to fall over.
Batteries in their boxes should not be stacked more than
three tall.
Check the battery immediately after transport.
If the user finds shell deformation or damage to the
battery pack, do not use it and immediately contact Iron
Edison.
4.1 Check the packing list
Item
Specification
Communication cable RJ45+RJ45 150mm length
1pcs
Terminal matching resistance 120 ohm RJ45
1pcs
Wall mounting bracket
1pcs
Expanding screw
10pcs
3. Storage and Transport