IROX EBR606C - Battery Installation for Main Unit

STEP 2STEP 1
BATTERY INSTALLATION FOR MAIN UNIT
1. Takeawaytheremovablestandfromtheweatherstation(mainunit).SeeSTEP1
2. Openthebatterycompartmentontherearoftheweatherstation.SeeSTEP2
3. Insert2AAAsize1.5Valkalinebatteriesasindicatedinthecorrectpolarity.
4. Closethebatterycompartment.
5. Putbacktheremovablestandandputtheweatherstationonatableormountit
on the wall without the removable stand.
6. InserttheplugoftheadapterintotheDC5VINJackoftheweatherstationand
connecttheadaptortoasocket-outlet(100-240VAC).
Note:
This EBR606C weather station must work with the adaptor. If you remove the
adaptor, the EBR606C will turn off the display, save the last reading of the tem-
perature and weather forecast and keep the internal clock running by the back-up
battery.
Note:
Replace the batteries when the low battery indicator appears on the top-right
corner of the display.
(ENG)
~24~