4.5. The function PACE MAKER (Pace Mode)
With this function you can set yourself a specific step rhythm via an acoustic signal.
With the NEXT button you can easily activate (ON) and deactivate (OFF) the pacer.
When it is activated a "Beep" will sound in the frequency indicated.
Settings:
Press and hold the ADJUST button for 2 seconds or as long as the words "HOLD ADJ" are displayed. As
soon as the pacer value blinks you can adjust this setting forwards with the NEXT button (Fast forward:
press and hold NEXT button).
Setting range: 30 / 50 / 60 / 70 / 80 / 90 / 100 /110 / 120 / 130 / 140 / 160 / 180 bpm
(beats per minute).
With the ADJUST button you can confirm the setting and return to the PACE display.
4.6. The function ALARM CLOCK (Alarm Mode)
With this function you can be awakened at a specific time or otherwise reminded of an appointment.
With the NEXT button you can easily activate (ON) and deactivate (OFF) the alarm.
When it is activated an alarm ring will sound for approx. one minute at the wake-up time indicated. The
alarm ring can be manually disengaged by pressing one of the following buttons: MODE, ADJUST, NEXT.
As long as the alarm is ON it will repeat itself daily at the set time.
Settings:
Press and hold the ADJUST button for approx. 2 seconds or as long as the words "HOLD ADJ" are
displayed.
As soon as the hour display blinks you can adjust this setting forwards with the NEXT button (Fast forward:
press and hold NEXT button). With the MODE button you can move to the minute setting.
Complete the setting with the MODE button. With this setting the alarm has automatically been set to ON.
4.7. The function STOPWATCH (Stopwatch Mode)
The stopwatch measures your time for a maximum of 23 hours and 59 minutes.
The resolution is 1/100 seconds.
The button functions are:
ADJUST: Start/Stop
NEXT : Reset to zero (only functions when the stopwatch is stopped)
MODE : Move on to another function (the stopwatch can continue running in the background)
To Next Page
Loading...
Need help?
General
