IrriGreen 2 - Irrigreen2 App Usage; Connecting to the App; Wi-Fi Range Considerations

Quick Install Guide
16
17
1. Align arrows on connectors
2. Push connectors together unl they boom out
3. Place CableLok Top over connectors
align ridge with corresponding ridge on connector
4. Snap CableLok Top down into place 5. Align and Snap CableLok Boom into place
To remove: use
sloed screwdriver
Align arrows
Align ridges
CableLok
Click or scan for
Step 12 video
Step 12: Controller Box Mounting
1. Remove top bracket from controller and place it
level on the wall.
2. Screw in the top bracket.
3. Put the controller on top bracket and slide it
down in place.
4. Put screws in the two holes on bottom bracket
to hold the controller box in place.
Controller slides onto
mounting bracket and
screws hold it in place.