Programming Hints
• Set points to track about
6” from zone edges
• Up to 50 map points are
allowed per zone
• “Best practice” is to use
minimal number of
positions/map points to
create zone shape and add
points as needed to
optimize tracking
20
• When zone is started up, it
will spray at Rotation “0”
and 15 feet
• It will turn only when you
tap/hold “Rotate”
• The zone startup (Position
1) may be set to any
Rotation (0-437), but the
first Position distance must
be 10+ feet to fully pop up
and seat the riser
To Next Page
