Need help?Do you have a question about the Irritrol MC-12E and is the answer not in the manual?
General| Type | Irrigation Controller |
|---|---|
| Number of Zones | 12 |
| Stations | 12 |
| Display | LCD |
| Weather Sensor Compatible | Yes |
| Enclosure | Indoor/Outdoor |
| Number of Programs | 4 |
| Number of Start Times | 4 per program |
| Rain Delay | Yes |
| Electrical Output | 24V AC |
| Surge Protection | Yes |
| Battery Backup | No |
| Master Valve/Pump Start | Yes |
| Sensor Input | Yes |
| Water Budget | 0% to 200% |
| Electrical Input | 120V AC |
| Voltage | 24V |
| Watering Days | 7 days per week |
Instructions for routing and connecting valve control wires between solenoids and the controller terminals.
Connecting a rain sensor to automatically suspend watering during rain events.
Safely connecting the MC-E controller to a 120 VAC power source following electrical codes.
Enabling and managing a four-digit password to prevent unauthorized access to settings.
Enabling or disabling the master valve for individual stations as needed.
Associating specific stations and their watering durations with a program.
Adding, changing, or removing station runtimes for programs, including batch operations.
Defining up to eight distinct start times for each watering program.
Selecting specific days for program operation or excluding certain days.
Modifying the global watering percentage to conserve water based on seasonal conditions.
Performing a complete factory reset, erasing all data and settings.
Installing the flow meter and connecting sensor wires to the controller.
Activating or deactivating the flow sensing feature for system monitoring.
Installing a master valve for emergency shut-off of unscheduled flow.
Selecting the correct flow sensor model and size code for accurate readings.
Teaching the controller the normal flow rate for each station.
Defining maximum flow limits to trigger overflow alarms.
To Next Page