Irritrol TITAN User Manual

TITAN
™
User Guide
Impact
Rotor
In cold climates, protect sprinkler from freeze damage by
installing a drain valve to bottom inlet.
Ensure Even Coverage
To ensure that each area of your lawn receives the same
amount of water (uniform coverage), install the nozzle
indicated in the chart to the left to correspond with the full
or part-circle spray pattern. Irritrol nozzles feature Matched
Precipitation Rates to allow sprinklers with dierent
patterns to be zoned together, in which each sprinkler
delivers matching amounts of water.
For new installations, avoid dry spots and areas of over-
watering by spacing sprinklers so their patterns overlap.
Use the guidelines in the accompanying chart and position
sprinklers as shown for optimum coverage.
Space sprinklers for head-to-head coverage.
1 2 3 4
Performance Data*
Standard Nozzle
Nozzle Pressure
psi
Radius
(ft.)
Flow
GPM
Precip.
in/h
Precip.
in/h
1.5
(orange)
30 32 1.5 0.16 0.14
40 35 1.8 0.16 0.14
50 36 2.3 0.20 0.17
02.0
(red)
30 33 2.0 0.20 0.18
40 37 2.2 0.18 0.15
50 40 2.5 0.17 0.15
3.0
(black)
30 35 2.9 0.26 0.23
40 39 3.6 0.26 0.23
50 41 5.0 0.26 0.23
4.0
(blue)
30 38 3.8 0.29 0.25
40 41 4.2 0.28 0.24
50 42 5.1 0.32 0.28
6.0
(green)
30 39 5.8 0.42 0.37
40 43 6.5 0.39 0.34
50 45 7.5 0.41 0.36
Low Angle (LA) Nozzle
Nozzle Pressure
psi
Radius
(ft.)
Flow
GPM
Precip.
in/h
Precip.
in/h
2.0LA
(grey)
30 23 1.8 0.33 0.38
40 24 2.0 0.33 0.39
50 25 2.2 0.34 0.39
4.0LA
(yellow)
30 27 3.7 0.49 0.56
40 30 4.3 0.46 0.56
50 32 4.8 0.45 0.52
* Precipitation rate data based on full-circle (360°).
Installation
Install sprinkler ush
with ground.
Connect water supply to
either bottom or side inlet.
Screw included plug into
unused inlet.
Fill hole with gravel
covered by a layer of soil.
Irritrol
5825 Jasmine Street
Riverside, CA 92504
©2020 Irritrol Systems • www.irritrol.com • Technical Support: 1-800-634-8873 Form Number 373-0813 Rev. B
WARNING: Cancer and Reproductive harm –
www.P65Warnings.ca.gov.
For more information, please visit www.toro.com/CAProp65.
Patent: www.ttcopats.com
!

Irritrol TITAN Specifications

General

Cycle + Soak	Yes
Sensor Input	Yes
Rain Delay	Yes
Manual Watering	Yes
Backlit LCD Display	Yes
Battery Backup	Yes
Zones	12
Mounting	Wall
Stations	12
Watering Days	7

Summary

Installation

Step 1: Install Sprinkler

Install the sprinkler flush with the ground for proper operation.

Step 2: Connect Water Supply

Connect the water supply to either the bottom or side inlet of the sprinkler.

Step 3: Screw in Plug

Screw the included plug into the unused inlet on the sprinkler.

Step 4: Fill Hole with Gravel

Fill the hole around the sprinkler with gravel, covered by a layer of soil.

Performance Data

Standard Nozzle Performance

Technical specifications for standard sprinkler nozzles including pressure, radius, flow, and precipitation rates.

Low Angle Nozzle Performance

Technical specifications for low angle sprinkler nozzles including pressure, radius, flow, and precipitation rates.

Coverage Guidelines

Ensure Even Coverage

Match sprinkler nozzles to spray patterns for uniform lawn watering and to avoid dry spots.

Sprinkler Spacing

Space sprinklers for head-to-head coverage to ensure optimal watering patterns.

Operation

Match Spray Pattern

Adjust sprinkler to full or part-circle patterns by flipping the trip lever and adjusting collars.

Replace a Nozzle

Step-by-step guide to removing and replacing sprinkler nozzles using tools.

Reduce Spray Distance

Adjust the spray reduction screw clockwise to decrease radius, counterclockwise to increase.

Maintenance and Troubleshooting

Maintenance Tips

Avoid oil, grease, or pipe dope; check nozzle for debris, valve, and timer functions.

Nozzle Adjustment Spring

Move adjustment spring to position B for orange or red low-flow nozzles.