What to do if some valves don’t operate in my Irritrol Rain Dial Plus 6?
If some valves in your Irritrol Irrigation System aren't working, the issue might stem from a defective solenoid or a loose wire connection. Test the solenoid and replace it if necessary. Ensure all wire connections are secure and check for continuity.
General| Brand | Irritrol |
|---|---|
| Model | Rain Dial Plus 6 |
| Category | Irrigation System |
| Language | English |
Lists items included in the Rain Dial Plus controller package for indoor and outdoor models.
Details electrical specifications, operating temperature, and battery backup for the controller.
Introduces the "Remote Ready" feature and the optional KwikStart system for remote activation.
Covers basic watering cycles, preventing common issues like delays, short cycles, and low pressure.
Explains how the controller detects and displays short or open circuits.
Provides a practical example of a watering schedule with program, valve, and timing details.
Guides on installing the battery and securely mounting the controller unit.
Details connecting an earth ground for protection and routing valve wires.
Covers connecting master valves, pump relays, and rain sensors.
Guides on connecting power for both indoor and outdoor models.
Emphasizes safety for power wire connections, including conduit installation and avoiding 3-phase systems.
Explains 'Anywhere Programming' and how program settings are stored in memory.
Details the rain sensor operation and the necessity of the bypass switch.
Explains the roles of the Program Selector and Function Switches.
Describes manual operation buttons, the dial, +/- buttons, display, time, and date settings.
Details the bypass function of the Rain Sensor Switch.
Covers setting schedules, start times, and valve run times using the dial.
Explains special functions like language selection and water budget adjustments.
Guides on setting time, date, and basic daily watering schedules.
Details setting Skip Days, Odd/Even schedules, start times, and valve run times.
Covers clearing programs and selecting the display language.
Explains how to modify watering run times by a percentage for each program.
How to review program settings and initiate manual program or valve starts.
How to stop watering and what the display shows when changing settings.
Explains display indicators for scheduling, water budget, and special features.
Details display messages for operating status, short circuits, and rain sensor activation.
How water budget display works and advice on documenting schedules.
Procedure for testing individual valves for electrical short circuits.
Addresses issues with valves not operating, watering at wrong times, and display problems.
Covers watering on wrong days, incorrect time, and fault displays like "FUS" or "SEN".
Step-by-step guide and safety warnings for replacing the controller's fuse.
Details FCC/CISPR compliance and provides technical support contact information.
To Next Page
