IRUS unitrak - Steering Bar Adjustment and Engine Start; Adjusting Steering Bar Working Height; Lateral Steering Bar Adjustment; Engine Starting Procedure Reference

Figure 3
1 Engine stop lever
2 Coupler lever
3 Catch spring
Adjusting the steering bar to the correct working height:
Pull lever (Fig. 1/3) upward and release the steering bar. Move the steering bar to the desired height. Press
lever (Fig. 1/3) downward and clamp tight.
Lateral adjustment of the steering bar:
Pull lever (Fig. 1 / 4) and move the steering bar to the desired side. Release lever (Fig. 1 / 4) and push the
steering bar back and forth until the locking bolt locks into place.
Starting the engine:
See separate instructions included with the engine.