26 of 30
5.3 Saving a recipe
It is possible to save both time and temperature controlled cycles.
In the latter case the time required to reach the core temperature
is saved.
Recipes can be saved in the following ways.
- During conservation after a customized blast
chilling/blast-freezing cycle. When the
key is pressed the device will offer to save the recipe
used.
- Save a recipe starting from a customized cycle.
- Select a recipe already present, modify it and save
it.
While saving is in progress the screen displayed will ask for the
recipe category, and then show the positions free and occupied. If
an occupied position is selected, the device will ask if the recipe is
to be over-written, otherwise the screen shown below will open
allowing the name of the recipe to be entered.
Over-writing a recipe
It is possible to over-write a recipe but not to delete it. When a
recipe is being over-written the screen below will be displayed
requesting confirmation of the choice.
To Next Page
Loading...
