GB
40 SRE2600X
Product description
2.6 Menu structure
Main Menu Programs Weekly Program see chapter 7.6 "Setting the mowing program",
page49
Entry Point see chapter 7.6.2 "Setting the start points", page49
Program Info see chapter 8 "Displaying information", page51
Settings Time see chapter 5.2 "Making the basic settings", page47
Date see chapter 5.2 "Making the basic settings", page47
Language see chapter 5.2 "Making the basic settings", page47
Cutting Height see chapter 7.2 "Setting the cutting height",
page48
PIN-Code see chapter 5.2 "Making the basic settings", page47
Key clicks see chapter 7.3 "Activating/deactivating the button
tones", page48
Rain sensor see chapter 7.4 "Setting the rain sensor", page49
After rain delay see chapter 7.4 "Setting the rain sensor",
page49
EcoMode see chapter 7.5 "Activating/deactivating Eco mode",
page49
Margin mowing see chapter 7.7 "Edge mowing with a manual start",
page50
Sub zone active/disabledsee chapter 7.8 "Setting the secondary
area mowing", page50
Display contrast see chapter 7.9 "Setting the display contrast",
page50
Safety settings see chapter 7.10 "Setting lock", page50
Reset calibration see chapter 7.11 "Recalibrating", page51
Factory reset see chapter 7.12 "Restoring factory settings",
page51
Informa-
tion
Blades service see chapter 8 "Displaying information", page51
Hardware see chapter 8 "Displaying information", page51
Software see chapter 8 "Displaying information", page51
Program Info see chapter 8 "Displaying information", page51
Failures see chapter 8 "Displaying information", page51