EasyManua.ls Logo

ISLABIKES Beinn - Front Wheel Setup and Brake Release; Recommended Torque Settings; Spares and Replacement Parts

ISLABIKES Beinn
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Beinn 20 Small / Beinn 20 L / Beinn 24 / Beinn 26 S / Beinn 26 L
Step 1 of 6
Remove front wheel packaging
and unhook the front brake
a. Remove front wheel protection packaging.
b. Remove fork plastic protection packaging.
E-mail: support@islabikes.com Telephone: 503 954 2410
Recommended torque settings
All stem bolts 7Nm
Saddle clamp bolts 7Nm
Seatpost collar bolt 4Nm
Crank bolts 35Nm
Pedals 30Nm
Wheel bolts 8Nm
Brake pads 6Nm
Brake cable pinch bolt 6Nm
Brake arm xing bolts 6Nm
Rear derailleur 6Nm
Spares and replacement parts
We carry stock of replacement parts for your Islabike including inner
tubes, tyres and grips. Please visit our website for a list of readily
available spares or contact us at 503 954 2410 or email
info@islabikes.com.
We only recommend using genuine parts for safety critical
components e.g. brake cables, brake blocks and bolts.
If you can’t nd what you are looking for or are unsure of any
compatibility for older models, please contact our technical support
team by phone or email.
support@islabikes.com
503 954 2410
For support on teaching your child to ride, please see our Info Hub.
www.islabikes.com/info-hub

Related product manuals