EasyManua.ls Logo

ISLABIKES Beinn - Bike Maintenance and Handlebar Setup; Component Lubrication Schedule; Handlebar Alignment and Tightening

ISLABIKES Beinn
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Beinn 20 Small / Beinn 20 L / Beinn 24 / Beinn 26 S / Beinn 26 L
Maintenance
Keeping your bike clean and maintained comes with many bene ts.
Not only will your Islabike perform better but it will be safer, last
longer and look great. To do this we have listed some regular checks
to help you along the way. Of course, if you are unsure of anything
we strongly recommend you seek professional advice or contact our
technical support team at 503 954 2410 or email
support@islabikes.com.
Firstly, moving parts on your bike will need lubricating from time to
time. Weather conditions are generally the biggest factor that
determine frequency of maintenance and lubrication. However, it is
also heavily dependent on the frequency, type and duration of riding.
Component Lubricant Frequency
Chain Oil Weekly or after washing / rain
Brake cables Oil Weekly or after washing / rain
Wheel bearings Grease 6 months
Pedals n/a Sealed bearings
Headset n/a Sealed bearings
Bottom bracket n/a Sealed bearings
E-mail: support@islabikes.com Telephone: 503 954 2410
Step 4 of 6
Handlebar set up
(Only required if fenders are tted)
a. Turn handlebars clockwise and align with front wheel
b. Tighten stem clamp bolt max. 7Nm
Failure to correctly tighten stem clamp bolt may result in serious
injury or death. If in doubt, please consult our technical support
team at 503 954 2410 or email support@islabikes.com.
Tur n
Do Not
Tighten
Tighten

Related product manuals