Beinn 20 Small / Beinn 20 L / Beinn 24 / Beinn 26 S / Beinn 26 L
Step 2 of 6
Securing front wheel
a. Put front wheel into the fork. Ensure quick release (QR) lever
is not on drive side. Check this matches rear.
b. Hold QR lever in fully ‘open’ position and turn nut clockwise.
Do not fully tighten nut.
Tighten
E-mail: support@islabikes.com Telephone: 503 954 2410
Tires and Tubes
Tire wear - Regularly check tires for general wear and tear. Over
time your tires will become more worn and can become more
susceptible to punctures.
Tire pressure - Regularly check your Islabike tire pressure as they
slowly go down over time. To check, simply push your thumb hard onto
the tire or use a pressure gauge fi tted to most quality bicycle track
pumps. If you can touch the rim this probably needs some more air.
You should not exceed the maximum tire pressure printed on
the sidewall of the tire. We recommend approx. 70% of the
maximum tyre pressure illustrated on your tire. To infl ate
presta valves you must fi rst open the valve by unscrewing and
tapping the valve end to relieve it if stuck. Infl ate to correct
pressure and then carefully re-tighten to close the valve.
Use our guide to infl ate your tires, http://www.islabikes.co.uk/info-hub/
how-to-infl ate-your-tires-video.
Valve closed Valve open
To Next Page
Loading...
