iSmartAlarm CubeOne User Manual

Home:
The contact sensors are armed, and the motion detector
is disarmed. After the “Home” is enabled (turned on), it
takes 90 seconds to allow user to walk out of the
premise before the iSmartAlarm system takes effect.
Disarm:
All devices are disarmed by either Remote Tag or through
the App. It allows up to 60 seconds to disarm the system
before the siren begins to go off.
8

iSmartAlarm CubeOne Specifications

General

Brand	iSmartAlarm
Model	CubeOne
Category	Security System
Language	English