iSmartAlarm CubeOne User Manual

OPERATING SETUP INSTRUCTIONS
STEP 1:
• Download the “iSmartAlarm Home Security System” application from your phone’s
App store.
• Connect the CubeOne™ to your router and into your wall outlet according to the
picture provided below.
• Power on the CubeOne™ and wait for the booting process to finish (it will
automatically boot, and should take 1-2 minutes).
o
You will know the booting process is finished when the CubeOne’s white LED light
“breathes” (i.e. flashes slowly)
STEP 2:
• Remove the insulation tags from the battery compartments of contact sensors,
remote tags, and motion sensor.
• Launch the iSmartAlarm App, and follow the on-screen instructions for user
registration and CubeOne™/devices registrations.
power adapter
router
(not included)
(bottom)
1 2 3 4WAN
12

iSmartAlarm CubeOne Specifications

General

Brand	iSmartAlarm
Model	CubeOne
Category	Security System
Language	English