iSmartAlarm Home Security System User Manual

Home:
Contact sensors are armed, and the motion
detectors are disarmed. After the "Home" is
enabled (turned on), by default the system take 180
seconds to allow user to walk out of the premise
before the iSmartAlarm system takes effect. You
can change the alarm arming delay in Alarm
Settings.
Panic:
A siren is set off (located in the CubeOne) at 100db
by default. You can change the siren's volume in
Alarm Settings.
9

iSmartAlarm Home Security System Specifications

General

Brand	iSmartAlarm
Model	Home Security System
Category	Security System
Language	English