* The specifications are guaranteed to 10A. A beeping alarm will go off when
the input current being measured is higher than 10A.
Resistance
Resistance Resolution Full Scale Test Current
Accuracy (1 year
23˚C ±5˚C)[2]
500 10m 510.00 0.83mA 0.1%+5 [1]
5k 100m 5.1000 0.83mA 0.1%+3 [1]
50k 1 51.000 83A 0.1%+3
500k 10 510.00 8.3A 0.1%+3
5M 100 5.1000 830nA 0.1%+3
50M 1K 51.000 560nA//10M 0.3%+3
[1] Using the REL function. If you don't use the REL function then increase
the error by 0.2.
[2] When measuring resistances greater than 500k, please use shielded
test leads to eliminate the noise interference that may be induced by
standard test leads.
* Open circuit voltage approximates 6V max on 500~5M range,
approximates 5.5V max on 50M range.
* Input protection of 500V peak on all ranges.
Diode
Range Resolution Full Scale Test Current
Accuracy(1 year
23˚C ±5˚C)
5V 100V 5.1000 0.83mA 0.05%+5
* Input protection of 500V peak. *Open circuit voltage approximates 6V.
Continuity
Range Resolution Full Scale Test Current
Accuracy(1 year
23˚C ±5˚C)
5000.0 100m 5100.0 0.83mA 0.1%+5
* Input protection of 500V peak. *Open circuit voltage approximates 6V.
To Next Page
Loading...
Need help?
General
