Need help?Do you have a question about the Iso-Tech IDM 106N and is the answer not in the manual?
Defines hazard symbols used in the manual for safety.
Steps for safely replacing the meter's fuses.
Instructions for replacing the meter's batteries.
Initial checks to resolve common meter issues.
Details accuracy and ranges for DC voltage measurements.
Details accuracy and ranges for AC voltage measurements.
Lists accuracy, range, and voltage burden for DC current.
Lists accuracy, range, and voltage burden for AC current.
Details specifications for measuring resistance.
Lists specifications for diode testing and continuity checks.
Provides specifications for frequency and RPM measurements.
Lists specifications for measuring capacitance.
General| Type | Digital Multimeter |
|---|---|
| Display | LCD |
| Digits | 3.5 |
| Max DC Voltage | 600V |
| Max AC Voltage | 600V |
| Max Current | 10A |
| Max Resistance | 20MΩ |
| Max Frequency | 10MHz |
| DC Voltage Ranges | 200mV, 2V, 20V, 200V, 600V |
| AC Voltage Ranges | 200V, 600V |
| DC Current Ranges | 200μA, 2mA, 20mA, 200mA, 10A |
| AC Current Ranges | 200μA, 2mA, 20mA, 200mA, 10A |
| Resistance Ranges | 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ, 20MΩ |
| Temperature Range | -20°C to 1000°C |
| Continuity Test | Yes |
| Diode Test | Yes |
| Safety Category | CAT II 600V |
| Battery | 9V |
| Capacitance Range | 20nF, 200nF, 2μF, 20μF |
| Frequency Range | 20kHz, 200kHz |
To Next Page
