Need help?Do you have a question about the Iso-Tech IDM 103N and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Display | 3.5 Digit LCD |
| Max DC Voltage | 600V |
| Max AC Voltage | 600V |
| Max Current | 10A |
| Battery | 9V |
| Continuity Test | Yes |
| Diode Test | Yes |
| Frequency Measurement | 20kHz |
Explains the meaning of warning and caution symbols for safe operation.
Outlines the product's warranty terms, conditions, and exclusions.
Defines hazardous conditions and actions to avoid injury or damage.
Provides key safety warnings for meter operation and usage.
Explains the meaning of symbols found on the multimeter's casing.
Lists important cautions to prevent damage or incorrect readings.
Defines symbols and technical terms used in the manual, like CAT levels.
Explains different levels of pollution and their impact on equipment.
Details safety standards and certifications the meter meets.
Instructions for checking items after unpacking the meter.
Specifies safe operating and storage environmental conditions.
Identifies and describes the parts of the multimeter's front panel.
Essential steps and warnings before taking measurements.
UK recommendation for risk assessment of electrical work.
Illustrates the procedure for measuring AC/DC voltage and frequency.
Details the process and precautions for measuring resistance.
Explains how to test diodes and check for continuity.
Covers the measurement of DC and AC current with the multimeter.
Guides on how to measure frequency (Hz) and revolutions per minute (RPM).
Explains the procedure and precautions for capacitance measurement.
Details how to measure temperature, specifically for Model 106.
Provides a summary of the multimeter's available features.
Introduces how to utilize the various features of the multimeter.
Shows which features are available for different measurement functions.
Explains how to use manual and auto ranging modes.
Details how to record minimum/maximum values and use the REL A function.
Explains how to freeze the displayed reading.
Describes how to turn the LCD backlight on and off.
Explains the automatic power-off feature to save battery life.
Instructions on how to disable the auto power off feature.
Guidance on cleaning the meter and proper storage procedures.
Instructions for replacing fuses and batteries with necessary precautions.
Steps to check before seeking service, including fuses and leads.
Procedures for testing the meter's fuses and test leads.
Lists general specifications like display, sampling rate, and dimensions.
Details accuracy and range specifications for DC and AC voltage measurements.
Provides accuracy and voltage burden for DC current measurements.
Details accuracy and voltage burden for AC current measurements.
Lists accuracy and open circuit voltage for resistance measurements.
Specifies resolution and accuracy for diode and continuity tests.
Details range, sensitivity, and accuracy for frequency and RPM measurements.
Lists accuracy and overload protection for capacitance measurements.
Provides accuracy and overload protection for temperature measurements.
Details accuracy specifications for the Peak Hold function across ranges.
To Next Page
