9
Introduction
Unpacking and Inspection
Upon removing your new Digital Multimeter from its packing,
you should have the following items.
1. Digital Multimeter.
2. Test lead set (one black, on red)
3. User Manual.
4. Protective holster.
Environmental Conditions
This product is safe at least under the following conditions:
1. Indoor Use.
2. Altitude up to 2000 Meter.
3. Operating Temperature and Relative Humidity :
Non-condensing ≦10°C ,11°C ~ 30°C (≦80% R.H)
31°C ~ 40°C (≦75% R.H), 41°C ~ 50°C (≦45% R.H),
4. Storage Temperature and Relative Humidity : -20°C ~ 60°C
(0 ~ 80% R.H) when battery removed from Meter.
5. Pollution degree 2
6. Installation category :
The standard 100 series models meet the requirements for
double insulation to IEC 61010-(2001), EN61010 (2001),
UL3111-1(6.1994), CSA C22.2 NO.1010-1-92 to terminals:
V/Ω : Cat. Ⅱ 1000V, Cat. Ⅲ 600V
mA /A : Cat. Ⅱ 600V, Cat. Ⅲ 300V
To Next Page
Loading...
Need help?
General
