Need help?Do you have a question about the Iso-Tech IDM 105N and is the answer not in the manual?
Explains the hazard identification symbols used in the manual.
Lists critical warnings for safe operation and to prevent harm.
Provides essential safety rules for using the multimeter.
Demonstrates how to measure AC and DC voltages.
Details the procedure for measuring resistance.
Demonstrates how to measure DC and AC current.
Warns about high voltage risks during current measurements.
Lists precautions to avoid damaging the meter during current measurements.
Details the procedure for measuring capacitance.
Warns against connecting the sensor to live circuits.
Details the steps and safety precautions for replacing fuses.
Explains how to replace the multimeter's batteries.
Offers initial steps to resolve common multimeter issues.
Provides detailed specifications for DC voltage measurements.
Lists specifications for AC voltage measurements.
Details specifications for DC current measurements.
Lists specifications for AC current measurements.
General| Type | Digital Multimeter |
|---|---|
| Display | LCD |
| Max DC Voltage | 600V |
| Max AC Voltage | 600V |
| Max Current | 10A |
| Resistance Measurement | Yes |
| Capacitance Measurement | Yes |
| Frequency Measurement | Yes |
| Temperature Range | -20°C to 1000°C |
| Diode Test | Yes |
| Continuity Test | Yes |
| Data Hold | Yes |
| Auto Power Off | Yes |
| Battery | 9V |
| DC Voltage Range | 200mV to 600V |
| AC Voltage Range | 200V - 600V |
| DC Current Range | 200μA to 10A |
| AC Current Range | 200μA to 10A |
| Frequency Range | 2kHz |
To Next Page
