Iso-Tech IDM 105N - Component Replacement; Fuse Replacement Procedure; Battery Replacement Procedure

27
  Caution
․ Use Two fuses with the
amperage, interrupt, voltage,
and speed rating specified.
․ Fuse rating : 1A, 600V, Fast.
Fuse rating : 15A, 600V, Fast.
  Caution
․ Replace the battery as soon
as the low battery indicator
"

" appears to avoid false
reading.
․ 103N/105 : Battery 1.5V x 2
106 : Battery 9V
Fuse Replacement
Refer to Figure xx to replace fuse :
Battery Replacement
Refer to Figure xx to replace the battery :