Iso-Tech IDM 103N - Specifications; General Specifications

29
Specification
General Specifications
Display : The Liquid Crystal Display (LCD) with a maximum
reading of 4000 and 82 segments bar graph.
Polarity Indication : Automatic, positive implied, negative
indicated.
Overrange Indication : “OL” or “-OL”
Low Battery Indication : “

” is displayed when the battery
voltage drops below operating voltage.
Sampling : 2 times/sec for digit. 12 times/sec for analog
bargraph.
Auto Power Off : Approx 30 minutes.
Operating Ambient :
Non-condensing ≦10°C,11°C ~ 30°C (≦80% R.H)
31°C ~ 40°C (≦75% R.H), 41°C ~ 50°C (≦45% R.H),
Storage Temperature : -20ºC to 60ºC , 0 to 80% R.H. when
battery removed from Meter.
Temperature Coefficient :
0.15 x (Spec.Acc’y) / ºC , <18ºC or > 28ºC .
Power Requirements :
Alkaline 1.5V x 2 batteries (for 103N/105N)
Alkaline 9V battery (for 106)
Battery Life :
Alkaline 500 hours. (for 103N/105N)
Alkaline 300 hours. (for 106)
Dimensions (W x H x D) :
90mm x 200mm x 42mm , without holster.
100mm x 212mm x 55mm , with holster.
Accessories : Protective Holster, Battery (installed), Test
leads and User manual.
Specification