5
2. Introduction
This multimeter is a compact, battery-powered, handheld measuring and testing device for service engineers, industrial use
and amateur electronics engineers and for testing and repairing pieces of equipment. The functions it can perform are as
follows:
Measurement of a.c. and d.c. voltages
Measurement of a.c. and d.c. currents
Measurement of resistance and capacitance
Continuity testing
Diode testing
Frequency and ADP measurement.
Unpacking and checking
When you unpack your new multimeter, the items you should have are these:
1. Digital multimeter
2. Set of test leads (one black and one red)
3. Operating manual
4. Batteries (fitted)
5. Rubber holster.
To Next Page
Loading...
Need help?
General
