Iso-Tech IPS606D - User Manual

Ei
DC POWER SUPPLY
(Switching mode)
ISO-TECH IPS1820D RS Stock No. 357-0760
ISO-TECH IPS3610D RS Stock No. 357-0776
ISO-TECH IPS606D RS Stock No. 357-0782
82IP-3610DMB

Summary

Specifications

Constant Voltage Operation

Details on output voltage range, regulation, recovery time, ripple & noise, temp. coefficient.

Constant Current Operation

Details on output current range, regulation, and ripple & noise.

Over Voltage Protection

Precautions Before Operation

Checking the Line Voltage

Theory of Operation

Panel Controls and Indicators

Front Panel Controls

Description of front panel indicators, controls for voltage, current, and meter.

Rear Panel Connections

Operation Instructions

Setting Current Limit

Step-by-step guide to setting the current limit and overload protection.

Constant Voltage;Current Characteristic

Explains the automatic crossover between CV and CC modes based on load.

Voltage Operation Mode

Procedure for operating the power supply in voltage mode, including setup and connection.

Maintenance

Fuse Replacement

Line Voltage Conversion

Internal Adjustments

Iso-Tech IPS606D Specifications

General

Output Voltage	0-60V
Output Power	360W
Ripple and Noise	<1mV RMS
Type	Linear
Voltage Resolution	10mV
Current Resolution	1mA
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Display	LED
Temperature Coefficient	100ppm/°C
Output Current	0-6A
Line Regulation	0.01% + 3mV
Load Regulation	0.01% + 3mV