Need help?Do you have a question about the Iso-Tech IPS 4303S and is the answer not in the manual?
Step-by-step guide to powering on the unit.
Detailed instructions for operating CH1 and CH2 independently.
Instructions for operating CH3 independently, including fixed/variable modes.
Instructions for operating CH4 independently (IPS 4303S only).
How to operate CH1 and CH2 in series tracking mode.
How to operate CH1 and CH2 in parallel tracking mode.
Procedure for saving current panel settings to memory.
Procedure for recalling saved panel settings from memory.
Configuration steps for remote control via USB connection.
Procedures for entering and exiting remote control mode.
Defines the format and parameters for remote commands.
Answers to common user queries about the product.
General| Power Rating | 90W |
|---|---|
| Ripple & Noise | < 1mVrms |
| Line Regulation | ≤ 0.01% + 3mV |
| Tracking Ratio | 1:1 |
| Voltage Resolution | 10mV |
| Current Resolution | 1mA |
| Output Voltage | 0-30V |
| Output Current | 0 to 3A |
| Operating Temperature | 0 to 40°C |
| Storage Temperature | -20°C to 70°C |
To Next Page
